- Stock: In Stock
- Article #: ABD-002
Fat harvesting,removing and fat transfer cannula kit. also used for Buttock augmentation, and Brazilian but lift surgery. Kit include huge variety of liposuction cannula also covering multiple surgeries.
Material: Stainless Steel
Finish: Mirror/Gold Plated.
List of Items:
1-Infiltration Cannula 15cm working length. dia 3mm
2-Harvest Micro Suction Cannula 15cm working length. dia 3mm , with Luer Lock connection
3-Harvest Suction Cannula 30cm working length. dia 4mm
4-Liposuction Handle without Rotation
5-ADAPTOR WITH LUER LOCK CONNECTION
6-Metal Stop Lock. For 10CC,20cc and 60CC syringe(1 each size)
7-Transfer with Leur Lock adaptor 20X20MM.
8-A holding device for Leur Lock Syringe.
9-Liposuction Handle anodised aluminium
10-LIPOSUCTION CANNULA ONE CENTRAL HOLE AND TWO LATERAL HOLES 30CM 4MM
11-LIPOSUCTION CANNULA 20CM WORKING LENGTH , 3MM DIA , THREE DIAGONAL HOLES
12-Fat injection cannula 1.4mm 15cm
13-Fat injection cannula 2.0mm 20cm
14-Syringe Set( 1CC,3CC,5CC,10CC,20CC AND 60CC)(1 each size)
- Sterilization: Surgical instruments may be steam autoclaved at a temperature of 121°C (250°F) for 30 minutes or flash autoclaved at a temperature of 127° to 132°C (260° to 270°F) for 10 minutes.
- Recommended Sterilization Parameters: PRE-VAC Unwrapped Goods Cycle 5 minutes at 132° C/270° F. Dry Time: none recommended.
Wrapped Goods Cycle 5 minutes @ 132° C/270° F Dry Time: 5‐20 minutes*
- Recommended Gravity. Unwrapped Goods Cycle 10 minutes @ 132° C/270° F Dry time: none recommended. Wrapped Goods Cycle 30 Minutes @ 132° C/270° F Dry Time: per facility recommendation. Wrapped Goods Cycle 60 Minutes @ 132° C/270° F Dry Time: per facility recommendation. *Depending on Hospital Protocol* Warning: Flash sterilization is not the recommended sterilization method. All surgical instruments and parts should be steam autoclaved when time permits. However, flash sterilization may be used when there is an immediate need for an instrument, injector, or accessory and there is no other alternative.
- Aeration: As required to return to room temperature or to start the next cycle.
- Contraindication: Hospital policy and procedure(s) take precedence over this protocol. Failure to use approved cleaning and sterilization procedures may void the warranty.
- Cleaning Instructions: Cleaning: All instruments must be cleaned to remove contaminated substances before sterilization. After each use, perform an initial cleaning within the sterile field by wiping the tool or instrument free of blood and body fluids. Then clean the instrument thoroughly with a mild soapy solution. Do not use alkaline-based cleaners. Complete preparation for sterilization by hospital procedure using an approved cleaning agent. Do not run any type of abrasive materials or steel brushes through the lumen of the tool. The abrasive material can score the inside of the tool, rendering them inefficient. After flushing, the instrument needs to be well-rinsed with warm to hot water. Visually inspect each instrument to ensure all fatty deposits are removed. All instruments should be cleaned and rinsed with mild, non-abrasive, grease-removing cleaners before they are sterilized. Gulmaher Instruments recommends that during the cleaning and rinsing procedures, all instruments should be inspected. Ultrasonic cleaning after manual cleaning is recommended.
Refund / Return Goods Policy
- Item must be in unused condition and the original packaging Or unopened. Sterilized, taped, modified, or abused items cannot be returned or refunded for credit.
- The customer is responsible for returning the item(s) to Gulmaher. Gumaher will issue merchandise return labels if the return is a result of Gulmaher's mishandling (shipping error, etc.).